9
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
Pre
paration
for Use
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
Note:
The speaker grilles are not removable.
Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
z
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
z
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
Demonstration mode
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
To turn the power on
Press the ON/STAND-BY button to turn the power on.
z
Use speakers with an impedance of 8 ohms or
more, as lower impedance speakers can
damage the unit.
z
Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
z
Do not let the bare speaker wires touch
each other.
z
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z
Do not stand or sit on the speakers. You may
be injured.
Incorrect
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
CD-ES222E(UK) TINSEA002SJZZ
2
Downloaded from:
