background image

10/3/05

MPX100EE_1.fm

30

TINSEA093AWZZ

CD-MPX100E

Advanced F

eatu

res

Timer and sleep operation (continued)

n

  Sleep operation

The radio, compact disc and cassette tape can all be turned off au-
tomatically.

To confirm the remaining sleep time:

To cancel the sleep operation:

Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.

n

To use timer and sleep operation together

Caution:

When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.

1

Play back the desired sound source.

2

Press the CLOCK/TIMER button.

3

Within 10 seconds, press the

 

 or 

 

 button to select

"SLEEP", and press the MEMO-
RY/SET (MEMORY)

 

button.

4

Press the 

 

 or 

 

 button to select time.

(Maximum: 3 hours - Minimum: 1 minute)

l

3 hours - 5 minutes   5 - minute intervals

l

5 minutes - 1 minute   1 - minute intervals

5

Press the MEMORY/SET  (MEM-
ORY) button.

"SLEEP" will appear.

6

The unit will enter the power stand-by mode automatically
after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep 

operation finishes.

1

Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 

 or 

 

 button to select 

"SLEEP X : XX".
"X : XX" is sleep remaining time. 

l

The remaining sleep time is displayed for about 10 seconds.

l

You can change the remaining sleep time whilst it is displayed 
by pressing the MEMORY/SET button (steps 4 - 5).

1

Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 

 or 

 

 button to select 

"SLEEP OFF", and press the MEMORY/SET (MEMORY) button. 

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.

Sleep and timer recording:

For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.

 1 Set the sleep time (see left, steps 1 - 5).
 2 Whilst the sleep timer is set, set the timer playback or recording 

(steps 2 - 10, pages 27 - 28).

Sleep timer setting

Timer playback or 
recording setting

Sleep operation will 
automatically stop.

Timer playback or recording
start time

End time

1 minute - 3 hours

Desired time

Downloaded from: 

http://www.usersmanualguide.com/

Summary of Contents for CD-MPX110E






































Reviews: