04/1/28
XL-DAB10N 20H_001 EN.fm
E-20
9
8
7
6
5
4
3
2
1
9
Timer and sleep operation (Remote control only) (continued)
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The “
” indicator
disappear and the display show “TMR-OFF”.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, press the SLEEP button for 2
seconds.
The “
” indicator light up and the display show “TMR-ON”.
Notes:
●
After selecting the playback source, when press the
CLOCK/TIMER button to confirm, “SOURCE” will
appear and blink for 2 seconds, then change to last
function.
●
When the preset time is reached, playback will start at
current setting if no selected playback source is made.
●
The volume cannot be preset during timer setting.
The radio, compact disc and USB can all be turned off
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
7
Press the
or
button to set hour and then press
the CLOCK/TIMER button.
8
Press the
or
button to set minute and then
press the CLOCK/TIMER button.
9
To select the timer playback source, switch input with
or
button to select “SOURCE”, then press the
CLOCK/TIMER button.
10
Press the
or
button to select wake up source
(CD, USB, Tuner, iPod) then press the CLOCK/
TIMER button to confirm.
11
If “TUNER” is selected, press the CLOCK/TIMER
button to enter the preset selection mode.
12
To select a preset channel number, press the
or
button and then press the CLOCK/TIMER button.
13
The “
” indicator lights up and the unit is ready for
timer playback.
14
Press the ON/STAND-BY button to enter the power
stand-by mode. Press the CLOCK/TIMER button to
confirm the timer setting.
15
When the preset time is reached, playback will start.
“
” indicator will blink to show timer playback. The
volume will increase gradually until it reaches the last
volume level.
16
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Checking the timer setting:
1
Press the CLOCK/TIMER button repeatedly to view as
follow:
■
Sleep operation
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10
20
30
...
80
90
4
“SLEEP” will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
1
Whilst “SLEEP” is indicated, press the SLEEP button.
The remaining time is displayed for about 10 seconds.
1
Whilst “SLEEP” is indicated, press the SLEEP button.
2
Within 10 seconds, press the SLEEP button repeatedly
to select “SLEEP 00”.
Summary of Contents for CP-DAB10NH
Page 35: ...92L4MDAB1003SR 10K R MW 1 ...
