09/9/8
XL-DH259N EN
9
8
7
6
5
4
3
2
1
E-8
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
Note:
To pause playback:
Press the / (USB / ) button.
Notes:
●
SHARP will not be held liable for the loss of data while
the USB memory device is connected to the audio
system.
●
This USB memory’s format supports FAT 16 or FAT 32.
●
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
●
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
●
This USB memory cannot be operated via USB hub or
external HDD-storage.
●
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
●
If unplayable file is played on this product, “NO
SUPPORT” is indicated.
●
This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
●
The USB port is only intended for direct connection to
a USB memory device without any cable.
●
Playback order for MP3 files may differ depending on
the writing software used during file download.
●
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
●
Playlists are not supported on this unit.
●
This unit can display Folder Name or File Name up to
32 characters.
Listening to USB mass storage device/MP3 player
1
Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2
Select desired file to be played back by pressing the
or
button.
3
Press the / (USB / ) button. Playback will start and
the file name will be displayed.
●
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
●
Display content can be changed by pressing the
DISPLAY button.
CD
USB
To playback USB/MP3 player with
folder mode off
1
Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2
Press the FOLDER button, and press the TUNING (
or
) button to select desired playback folder. To start
playback with folder mode on, go to step 4. To change
the playback folder, press the TUNING (
or
) button
to select another folder.
3
Select desired file to be played back by pressing the
or
button.
4
Press the / (USB / ) button. Playback will start and
the file name will be displayed.
●
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
●
Display content can be changed by pressing the
DISPLAY button.
1
Press the (USB ) button to stop playback.
2
Disconnect USB memory device from the USB terminal.
To playback USB/MP3 player with
folder mode on
To remove USB memory device
