25
XL-UH4H
SD Memory Playback
Note:
To pause playback:
Press the USB/SD
/
button.
To remove SD memory device
Notes:
SHARP will not be held liable for the loss of data whilst the SD
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the SD terminal.
This SD memory’s format support FAT 16 or FAT 32.
SHARP cannot guarantee that all SD memory devices will work
on this audio system.
This SD memory cannot be operated via SD hub.
If "NO SONG" is displayed, it means "Copyright protected WMA
file" or "Not supported playback file" is selected.
The SD terminal in this unit is not intended for a PC connection
but is used for music streaming with a SD memory device.
The larger the capacity of the SD storage device, the longer it will
take for the data to be read.
Some SD multi-reader devices may not work correctly with the SD
terminal on this unit.
External storages devices cannot be played back using the SD
terminal on this unit.
2
Press the TUNING/FOLDER (
or
) button to select de-
sired playback folder.
To start playback with folder mode, go to step 4.
To change the playback folder, press the TUNING/FOLDER (
or
) button to select another folder.
In case of playback in the folder mode, press the TUNING/
FOLDER (
or
) button, and the desired folder can be
selected even though it is in playback mode.
It will continue playback mode in the 1st track of the selected
folder.
3
Select desired track to be played back by pressing the
or
button. Proceed to step 4.
4
Press the USB/SD / button. Playback will start and the
track name will be displayed.
Press the MEMORY/DISP button (ID3 ON/OFF) to display Title,
Artist and Album name.
ID3 ON - Title, Artist and Album name is displayed.
ID3 OFF - Title, Artist and Album name is not displayed.
1
Press the STOP button on the remote control or button
on the main unit.
2
Remove SD memory device from the SD terminal.