<P=004>
(Continued)
■
Divide
1
Play the track which you want to divide into two, and press the MD
0 6
button
at the point where you want to divide the track.
●
The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select "DIVIDE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
●
To cancel the operation, press the MD
■
button.
4
Press the ENTER button again.
●
The track is divided, and the unit is stopped at the beginning of the second of
the two tracks.
●
The numbers of the tracks which come after the divided track are automatically
increased by one.
●
When a track which has been given a name is divided, the two new tracks will
have the same name and date. If the "TOC FULL" message is seen, the second
track may not be given a name. (Page 50)
Notes:
●
This unit can hold up to 255 tracks. However, even if the number of tracks
assigned has not reached 255, it might not be possible to make any further
divisions of tracks. (Page 50)
●
This function cannot be used whilst a programme is being entered ("PROGRAM"
is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22).
First, cancel the programme or random play mode before trying to use this
function.
■
Combine
1
Whilst in the stop mode, select the second of the two adjacent tracks you want
to combine using the jog dial.
Or start playing the second of the two tracks you want to combine, and then
press the MD
0 6
button.
●
The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select "COMBINE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
●
To cancel the operation, press the MD
■
button.
4
Press the ENTER button again.
●
The two tracks are combined, and the unit is stopped at the beginning of the
combined track.
●
The numbers assigned to the tracks following the combined track are automat-
ically decreased by one.
When both tracks have a name:
●
When only the first track has a name
→
That name will be used.
●
When only the second of the two tracks has a name
→
That name will be used.
●
When both tracks have a name
→
The name of the first track will be used.
To combine two non-contiguous tracks:
(Example: the first and third tracks)
Move the third track to the second track using the MOVE function. (Page 39)
Then, combine the first and second tracks using the COMBINE function.
Notes:
●
Tracks recorded from analogue inputs cannot be combined with tracks recorded
from CDs or MDs using the digital inputs.
●
Tracks recorded in the stereo mode cannot be combined with tracks recorded
in the monaural long-play mode.
●
Tracks where either track’s recording time is less than 15 seconds may not be
combined.
●
This function cannot be used whilst a programme is being entered ("PROGRAM"
is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22).
First, cancel the programme or random play mode before trying to use this
function.
MD
2
1
2
3,4
1
2
3
4
MD
2
1
1,2
3,4
1
2
3
4
MD-X60H(SUK) TINSE0227AWZZ
38
