01/1/17
XL-3000(U2)3.fm
24
Ra
d
io
- L
ist
en
in
g
t
o
t
h
e
me
m
o
ri
z
e
d
st
at
io
n
-
Listening to the memorized station
„
Memorizing a station
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord disconnection.
„
To recall a memorized station
„
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
„
To clear a memorized station
1
Perform the steps 1 - 3 in "Listening to the Radio" on
page 22.
2
Press the MEMORY/SET
(MEMORY) button to enter the
preset tuning saving mode.
3
Within 5 seconds, press the
PRESET ( or ) button to se-
lect the preset channel num-
ber.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the
MEMORY/SET (MEMORY) but-
ton to store that station in
memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
Preset channel
Frequency and frequency band
1
Press the PRESET ( or ) button for more than 0.5
seconds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the de-
sired station is located.
1
Recall the memorized station.
2
While it is displayed, press the
MEMORY/SET (MEMORY) but-
ton.
3
Within 5 seconds, press the
CLEAR button on the remote con-
trol.
Listening to the Radio (See page 22.)
