background image

XL-30H/30W

– 2 –

Precaution to be taken when replacing and servicing the Laser Pickup.
The AEL (Accessible Emission Level) of Laser Power Output for this model is specified to be lower than Class I Requirements.
However, the following precautions must be observed during servicing to protect your eyes against exposure to the Laser beam
(1) When the cabinet has been removed, the power is turned on without a compact disc, and the Pickup is on a position outer than

the lead-in position, the Laser will light for several seconds to detect a disc. Do not look into the Pickup Lens.

(2) The Laser Power Output of the Pickup inside the unit and replacement service parts have already been adjusted prior to shipping.
(3) No adjustment to the Laser Power should be attempted when replacing or servicing the Pickup.
(4) Under no circumstances look directly into the Pickup Lens at any time.
(5) CAUTION - Use of controls or adjustments, or performance  of procedures other than those specified herein may result in

hazardous radiation exposure.

SAFETY PRECAUTION FOR SERVICE MANUAL

(FOR XL-30W)

(XL-30H for Europe)

CAUTION

This Micro Component System is classified
as a CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT label is lo-
cated on the rear cover.

Use of controls or adjustments or perform-
ance of procedures other than those speci-
fied herein may result in hazardous radiation
exposure.

As the laser beam used in this compact disc
player is harmful to the eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.

Laser Diode Properties

Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW

CAUTION-INVISIBLE  LASER  RADIATION  WHEN  OPEN.  DO  NOT  STARE  INTO 
BEAM  OR  VIEW  DIRECTLY  WITH  OPTICAL  INSTRUMENTS.

VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.  STIRRA
EJ  IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN   MED  OPTISKA  INSTRUMENT.

ADVERSEL-USYNLIG  LASERSTRALING  VED  ABNING.  SE  IKKE  IND  I 
STRALEN-HELLER  IKKE  MED  OPTISKE  INSTRUMENTER.

VARO!  AVATTAESSA  OLET  ALTTIINA  NAKYMATON  LASERSATEILYLLE.
ALA  TUIJOTA  SATEESEEN  ALAKA  KATSO  SITA  OPTISEN  LAITTEEN  LAPI.

VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.
STIRRA  EJ IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN  GENOM  OPTISKT  
INSTRUMENT.

ADVERSEL-USYNLIG  LASERSTRALING  NAR  DEKSEL  APNES.  STIRR IKKE  
INN  I  STRALEN  ELLER  SE  DIREKTE  MED  OPTISKE  INSTRUMENTER.

CAUTION
Use of controls, adjustments or performance of pro-
cedures other than those specified herein may re-
sult in hazardous radiation exposure.
As the laser beam used in this compact disc player
is harmful to the eyes, do not attempt to disassem-
ble the cabinet. Refer servicing to qualified person-
nel only.

LASER KLASSE 1

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

(XL-30H for U.K.)

Laser Diode Properties

Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW

VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA
KUIN TÄSSÄ KÄYTTÖOHJEESSA MAI NI TULLA
TAVALLA SAATTAA ALTI STAA KÄYTTÄJÄN
TURVALLI SUUSLUOKAN 1 YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.

VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT
SÄTT ÄN I DENNA BRUKSANVI SNI NG SPECI FI
CERAS. KAN ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER
GRÄNSEN FÖR LASERKLASS 1.

CAUTION-INVISIBLE  LASER  RADIATION  WHEN  OPEN.  DO  NOT  STARE  INTO 
BEAM  OR  VIEW  DIRECTLY  WITH  OPTICAL  INSTRUMENTS.

VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.  STIRRA
EJ  IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN   MED  OPTISKA  INSTRUMENT.

ADVERSEL-USYNLIG  LASERSTRALING  VED  ABNING.  SE  IKKE  IND  I 
STRALEN-HELLER  IKKE  MED  OPTISKE  INSTRUMENTER.

VARO!  AVATTAESSA  OLET  ALTTIINA  NAKYMATON  LASERSATEILYLLE.
ALA  TUIJOTA  SATEESEEN  ALAKA  KATSO  SITA  OPTISEN  LAITTEEN  LAPI.

VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.
STIRRA  EJ IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN  GENOM  OPTISKT  
INSTRUMENT.

ADVERSEL-USYNLIG  LASERSTRALING  NAR  DEKSEL  APNES.  STIRR IKKE  
INN  I  STRALEN  ELLER  SE  DIREKTE  MED  OPTISKE  INSTRUMENTER.

All manuals and user guides at all-guides.com

Summary of Contents for CP-XL40H

































































Reviews: