XL-T300H
– 8 –
1
Top Cabinet
1. Screw .................. (A1) x6
8-1,2
2. Hook .................... (A2) x4
8-2
3. Socket ................. (A3) x9
4. Flat Cable ............ (A4) x1
2
Bottom Cabinet
1. Screw ................ (B1) x12
8-1,3
/Chassis
2. Hook .................... (B2) x3
8-3
3
Tuner PWB
1. Screw ................. (C1) x2
9-1
2. Socket ................ (C2) x1
4
Terminal PWB
1. Screw ................. (D1) x2
9-1
2. Socket ................ (D2) x2
5
Main PWB
1. Screw .................. (E1) x8
9-1
2. Socket ................. (E2) x3
6
CD Mechanism
1. Screw .................. (F1) x4
9-2
7
Tape Mechanism
1. Screw ................. (G1) x4
9-2
8
Gear Box
1. Screw ................. (H1) x3
9-3
2. Socket ................ (H2) x1
9
Switch PWB
1. Screw .................. (J1) x1
9-3
10
LED PWB/Holder PWB 1. Screw .................. (K1) x1
9-3
11
Display PWB
1. Screw .................. (L1) x7
9-3
/Switch PWB
2. Hook .................... (L2) x4
DISASSEMBLY
STEP
REMOVAL
PROCEDURE
FIGURE
Note:
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector remove to protect the optical pickup
from electrostatic damage.
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
Bottom Cabinet
Top Cabinet
(A1) x3
ø3 x10mm
(B1) x2
ø3 x10mm
(B1) x1
ø3 x10mm
(B1) x4
ø3 x10mm
Figure 8-1
Figure 8-2
Figure 8-3
Hook
Up
Slide
Top Cabinet
Bottom Cabinet
Bottom Cabinet
Top Cabinet
CD Mechanism
Tape
Mechanism
(A1) x3
ø2.5 x12mm
Hook
(A2) x2
(A3) x4
(A4) x1
(A3) x3
Hook
(A2) x2
(A3) x2
Bottom
Cabinet
Chassis
Bottom Cabinet
Main PWB
Pull
Main PWB
(B1) x5
ø3 x8mm
Hook
(B2) x3
Summary of Contents for CP-XLT300H
Page 48: ...XL T300H 48 MEMO ...