background image

KEY OPERATOR PROGRAMS

54

SETTING PROGRAMS

The setting programs for the network scanner feature of the machine are explained here. For key operator programs
that are related to the copy function and general use of the machine, see the key operator’s guide. For programs
related to the printer and network scanner functions, see the corresponding manuals.

Operation settings

The following programs are available:

O

Default display settings

O

The number of direct address/sender keys
displayed setting

O

Must input next address key at broadcast setting

O

The number of file name/subject keys displayed
setting

O

Initial resolution setting

O

Scan complete sound setting

O

Default exposure settings

Default display settings

You can select the initial display that appears when
you press the [IMAGE SEND] key to change to
scanner mode or when you press the [CA] key in
scanner mode. Normally the initial display is set to
the Condition setting screen (E-MAIL/FTP mode or
FAX mode if the facsimile feature is installed).
The following five selections are available:

O

Address book (ABC)

O

Address book (Group)

O

Fax (if the facsimile feature is installed)

O

E-mail/FTP

O

Internet-Fax

When an address book (ABC or Group) is selected,
the selected index of that address book (

page 10

)

is set as the initial screen.
When [SWITCH AUTOMATICALLY TO COPY
MODE SCREEN] is selected, the display will
automatically switch to the copy mode screen if no
action is taken in the fax / image send mode screen
for 20 seconds.

The number of direct address/sender

keys displayed setting

The number of one-touch keys displayed in each
address book screen can be changed from 6 (the
normal setting) to 9.
Touch [6] or [9] to select the desired number.

Must input next address key at

broadcast setting

You can select whether the [NEXT ADDRESS] key
must be touched before entering the next
destination when performing a broadcast
transmission (

page 16

). Normally the machine is

set so that touching the [NEXT ADDRESS] key can
be omitted except when the numeric keys are used
to enter one full fax number after another full fax
number in the fax mode.

Example: Normal setting (factory setting)

If the box is checked, it will no longer be possible to
omit the [NEXT ADDRESS] key as shown in the
above example. Even if the next destination to be
entered is a one-touch key, the [NEXT ADDRESS]
key must be touched before the one-touch key can
be entered. If an operator attempts to enter the
next destination without touching the [NEXT
ADDRESS] key, an alarm will sound.

The number of file name/subject keys

displayed setting

This program is used to select the number of file

name / subject keys that are displayed in the

screen. The number of keys can be set to 3 or 6.

Touch 3 or 6 to select the desired number.

Initial resolution setting

This is used to change the default resolution
setting for transmission in network scanner mode.
The default resolution is initially set to
"300x300dpi" (E-mail/FTP mode) or "STANDARD"
(Internet-Fax mode). To change the setting, touch
the desired resolution key.

1

Select the transmission method to be

used (such as E-mail or Internet-Fax).

If you wish to use the stored image setting as the
default setting when transmitting an image that
was stored with the document filing function,
check the [APPLY THE RESOLUTION SET
WHEN STORED] box on this screen.

2

Touch the desired resolution key.

3

Touch the [OK] key.

NOTE

For the key name that appears in each one-touch
key, a maximum of 18 characters can appear when
the number of one-touch keys displayed is set to 6. A
maximum of 10 characters can appear when the
number of one-touch keys displayed is set to 9. 

XXXX

NEXT ADDRESS

NEXT ADDRESS

One-touch

One-touch

Dial

XXXX

NEXT ADDRESS

Dial

XXXX

Dial

Can be omitted

Cannot be omitted

Can be omitted

(fax mode only)

Summary of Contents for DIGITAL LASER COPIER/PRINTER
































































Reviews: