Gett
ing St
arted
1
1-
4
Charging Battery
Battery must be inserted in handset to
charge it.
.
Use specified AC Charger
ZTDAA1
(sold
separately) only. In this guide, ZTDAA1 is
referred to as "AC Charger."
.
Handset and AC Charger may warm
during charging.
1
Open Port Cover as shown
2
Insert Charger Connector
.
With arrows up, insert connector
until it clicks.
3
Extend blades and plug AC
Charger into AC outlet
.
Small Light illuminates red while
charging.
.
Small Light goes out when battery
is full.
4
Unplug AC Charger
.
Pull AC Charger straight out.
5
Disconnect handset
.
Squeeze Charger Connector
release tabs and pull straight out
to remove.
6
Fold back blades and
replace Port Cover
Charging Battery (AC Charger)
Important AC Charger Usage Note
.
Fold back blades after charging. Do
not pull, bend or twist the cord.
AC 100V Outlet
Blades
AC Charger
Small Light
Port Cover
Arrows
Release Tabs
Charger
Connector
External Device
Port
When Small Light Flashes
.
Battery is unchargeable; may be
defective or simply at the end of its
life; replace it.
USB Charge
.
Connect handset (with power on) to
PC via USB Cable to charge battery.
Charging Battery Overseas
.
Disney Mobile is not liable for problems
resulting from charging battery abroad.
Advanced
0