Ap
pen
d
ix
14
14-
1
8
Specifications
.
Above values calculated with battery installed.
.
Continuous Talk Time is an average
measured with a new, fully charged battery,
with stable signals.
.
Continuous Standby Time is an average
measured with a new, fully charged battery,
with handset closed without calls or
operations, in Standby with stable signals.
.
Talk Time/Standby Time may vary by
environment, status, settings, etc.
.
Display employs precision technology,
however, some pixels may appear brighter/
darker.
[
Handset Materials
[
Battery
[
Desktop Holder
Specifications
Disney Mobile DM003SH
Weight
Approximately 124
g
Continuous
Talk Time
Approximately 250 minutes (3G)
Approximately 230 minutes (GSM)
Continuous
Standby
Time
Approximately 340 hours (3G)
Approximately 310 hours (GSM)
(handset closed)
Charging Time
(power off)
AC Charger: Approximately
140 minutes
In-Car Charger: Approximately
140 minutes
Dimensions
(W x H x D)
Approximately 50 x 105 x 1
8
.1 mm
(handset closed, without protruding
parts)
Maximum
Output
0.25 W (3G)
2.0 W (GSM)
Parts
Materials & Finishing
Housing (Display side,
Keypad side)
Nylon resin/SUS
(insert-molded),
discontinuous
deposition/UV painting
Housing (Display back
hinge, hinge;
Illumination Light area)
ABS resin, discontinuous
deposition/UV painting
Housing (Display back)
Acrylic resin/UV hard
coating (in-mold decoration)
Housing (battery side),
Battery Cover
Nylon resin, UV painting,
printed
Display window,
camera lens, External
Display window
Acrylic resin
Camera ornament
(Infrared Port, Mobile
Light), Start Key, Power
On/Off Key, Mail Key,
D Key, Shortcuts & A/a
Key, Clear/Back Key, TV
& Text Key, Multi Job &
Manner Key, Keypad
PC resin
Battery Cover Lever
POM resin
Center Key, Multi
Selector
Aluminum, anodized
aluminum paint
Side Keys
PC resin, UV painting
External Device Port
Cover, Headphone Port
Cover
PC resin/Elastomeric
resin, discontinuous
deposition/UV painting
Charging Terminals
SUS/Gold plating
(sealer: nickel)
Screw (all pieces)
SWCH12A/Trivalent
chromate, EPDM O-ring
seal
USIM pin
Copper alloy/Gold
plating (sealer: nickel)
Accessories
Voltage
3.7V
Battery Type
Lithium-ion
Capacity
770 mAh
Dimensions
(W x H x D)
Approximately 37.3 x 44.
8
x 4.7 mm
(without protruding parts)
Input Voltage/
Current
DC 5.4V/700 mA
Output Voltage/
Current
DC 5.4V/700 mA
Charging
Temperature
5
o
C to 35
o
C
Dimensions
(W x H x D)
Approximately 76 x 105 x 6
8
mm
(with Stand attached)
Parts
Materials & Finishing
