Status
LCD display
Content
Error
Check
Panel
Toner empty
Drum replacement
Cover open
Service call error
Clear
Paper Path
Paper jam
Paper exit tray full
User
setting
Main Menu
Copies
Printing of the set
quantity is made.
Resolution
Printing at the set
resolution is made.
Smoothing
Smoothing
function setting.
Toner Save
Toner save mode
setting
Page Protection
Setting of page
protection function
2-Sided Printing
Setting of duplex
function and
binding direction
Paper Source
Tray select
Paper Size
Paper size select
Orientation
Setting of print
direction
Emulation
Emulation setting
Network
Menu
Set IP Address
IP address
setting is made.
Set Subnet Mask
Subnet Mask
setting is made.
Set Default Gateway
Default Gateway
setting is made.
Enable TCP/IP
Enable/Disable
TCP/IP
Enable Netware
Enable/Disable
Netware
Enable EtherTalk
Enable/Disable
EtherTalk
Reset to Defaults
Reset Print
Server Card to
default
PS2 Menu
Print PS2 Error
Setting of printing
in case of PS
Error
Interface
Menu
I/O Time Out
If data reception
is not completed
within the set
time, it is judged
as a time out
error.
Test
Printing
Menu
Configuration Page
Configuration
page is printed.
PCL Font List
PCL6 Font page
is printed.
PS2 Font List
PS2 Font page is
printed.
b. LED display
ON LINE light
Extinguished
Indicates that the printer is off-
line and data cannot be
transferred or printed. Make
settings from the operation
panel in this mode. Note,
however, that you cannot make
settings if the “Data Remaining”
message is displayed.
Lit
Indicates that the printer is on-
line and data can be transferred
and printed.
DATA light
Extinguished
Indicates that there is no data
being received or processed.
Lit
Indicates that the printer is
receiving or processing print
data.
Blinking
Indicates that there is print data
remaining in memory that has
not yet been printed.
c. Operation keys
LINE key
Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive
data from the computer with which it is
connected.
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the “Data Remaining” message is displayed.
MENU key
Used to show setting menus on the display in
sequence.
∗
ITEM key
Used to show the setting items of the
selected menu in sequence.
∗
Left arrow key
Right arrow key
Used to change the value of any item.
∗
ENTER key
Used to enter a new value.
∗
Invalid when the printer is on-line.
(5) Network board
10/100 Base TX
TCP/IP, IPX/SPX, Ether Talk
10 Base T/2
TCP/IP, IPX/SPX, Ether Talk
(6) PC environment
a. In the case of IBM PC/AT or compatible computers
Computer
Type
IBM PC/AT or compatible computer equipped with a
bi-directional parallel interface and CD-ROM drive
Operating
System
Windows 95, Windows 98, Windows NT4.0
Windows 3.1
CPU
Windows 95: 486SX or better
Windows 98: 486DX/66MHz or better (Pentium or
better is recommended.)
Windows NT4.0: 486/25MHz or better
RAM
Windows 95: 8 MB or more (12 MB or more is
recommended.)
Windows 98: 16 MB or more (32 MB or more is
recommended.)
Windows NT4.0: 16 MB or more
DM-2000
2 – 5
