31
Post Code Security
This feature should allow the Police to identify
you as the owner of the Recorder if it is
stolen. Each time the Recorder is turned on,
your postcode will be displayed for 5
seconds. Your postcode cannot be changed
or removed without first entering the correct
PIN-number. If you would like to use this
function, follow the procedure below.
1
Press
START MENU
to display
the “START MENU” screen.
2
Press
'
/
"
/
\
/
|
to select
“OTHER SETTINGS”, then press
SET/ENTER
.
Post Code
3
Press
\
/
|
to select “CONTROL
SET ”.
4
Press
'
/
"
to select “POST
CODE”, then press
SET/ENTER
.
5
Press the
Number
buttons to
enter your desired PIN number.
• This must be a 4 digit number in the
range 0000 – 9999.
6
After entering the PIN number,
press
|
to highlight the first digit
of “POST CODE”.
7
To enter your post code press
'
/
"
to scroll through the charac-
ters, then press
\
/
|
to move to
the next position.
8
Write your PIN number in the box
provided for future reference.
Changing PIN NUMBER
You can change your PIN number at any time
with the following procedure.
1
Press
START MENU
to display
the “START MENU” screen.
2
Press
'
/
"
/
\
/
|
to select
“OTHER SETTINGS”, then press
SET/ENTER
.
3
Press
\
/
|
to select “CONTROL
SET”.
4
Press
'
/
"
to select “POST
CODE”, then press
SET/ENTER
.
5
Press the
Number
buttons to
enter your current PIN number,
then press
SET/ENTER
.
6
Press
\
to re-select PIN number.
7
Enter your new PIN number. Press
SET/ENTER
to confirm, then
press
START MENU
or
EXIT
to
return to a normal screen.
NOTE
• Your Postcode can be changed at any
time, but you must first enter your correct
PIN number. If the wrong PIN number is
entered, an “ERROR” will appear. Re-enter
the correct number.
OTHER SETTINGS (CONTROL SET: POST CODE)
- - - -
PIN NUMBER
5
4
:
8
2 [SAT]
1
/
4
2
EXIT
EXIT
RETURN
INPUT
0 9
Important!
• Keep your Operation Manual separate
from your Recorder.
HR480H-027-035
05.4.25, 1:09 PM
31
Summary of Contents for DV-HR400H
Page 131: ......
