Sharp DV-S1X, Operation Manual

– 10 –

EN

SETTING UP YOUR DVD  PLAYER

C

C

Digital Connection

You can make this connection using either a coaxial digital cable or an optical digital cable.

Digital Connection to an MD to Record a CD

Some Audio CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.

C

C

Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder

• Audio 

CD

Play the disc as you normally would, with the audio mode set to “L+R”. With a digital connection, audio of a disc recorded
with DTS sounds abnormal in this case.

• DVD

With a digital connection, audio cannot be produced from a DVD recorded in Dolby Digital (5.1 channel), Dolby Surround
(Pro Logic), DTS or MPEG Audio.
You should use an analogue connection to play Dolby Digital (5.1 channel) and MPEG Audio. (Dolby Surround (Pro Logic)
and DTS audio cannot be produced with an analogue connection).
Discs with linear PCM audio should play normally.

DVD Player

VIDEO

R

L

C

B

C

R

Y

S-VIDEO

 VIDEO OUT

COMPONENT

COAXIAL

OPTICAL

COAXIAL

OPTICAL

DIGITAL IN

AUDIO OUT

DIGITAL

Coaxial digital cable
(commercially available)

To optical digital
input jack

or

To OPTICAL
DIGITAL OUT
jack

Optical digital cable

(commercially

available)

To coaxial digital
input jack

To COAXIAL
DIGITAL OUT
jack

Audio equipment with
optical/coaxial digital input jack

E56B5AD.QX3  02.8.24 11:18 AM  Page 10