Sharp DV-S1X, Operation Manual

You can change certain aspects of the DVD’s display
screens, on-screen messages and the display panel on the
front of the DVD player.

In stop mode press 

SETUP

.

Press 

K

or 

L

to select DISPLAY, then press

ENTER

.

Press 

K

or 

L

to select the below items, then press

ENTER

.

TV Aspect:

• Press

K

or 

L

for an item selection, then press

ENTER

.

• Select 4:3 LETTER BOX for a black bars appears on

the top and bottom of the screen.

• Select 4:3 PAN & SCAN for a full height picture with

both sides trimmed.

• Select 16:9 WIDE if a wide-screen TV is connected to

the DVD player.

Panel Display:

• Press

K

or 

L

to select BRIGHT, DIMMER and AUTO,

then press 

ENTER

.

• This adjust the brightness of the display panel with the

factory default BRIGHT.

• When AUTO is selected, the display dims only during

playback.

Angle Icon:

• Press 

ENTER

repeatedly to turn Angle icon ON or

OFF.

• The default setting is ON.

Auto Power Off:

• Press 

ENTER

repeatedly to turn Auto Power ON or

OFF.

• The default setting is ON and it will turn the DVD player

to off automatically after 35 minutes of no use.

Press 

SETUP

to exit.

4

3

2

1

Display Setting

Choose the appropriate Audio settings for your equipment as
it only affect during the playback of DVD discs of the DVD
player.

NOTE:

•  These audio settings are effective only when using a digi-

tal connection. Although you may change the settings from
the on-screen display, these audio settings do not actually
affect the sound when using an analogue connection.

In stop mode press 

SETUP

.

Press 

K

or 

L

to select AUDIO, then press 

ENTER

.

Press 

K

or 

L

to choose the below items and press

ENTER

repeatedly to turn the setting ON or OFF.

Dynamic Range Control (DRC):

• The default setting is OFF.
• To compress the range of sound volume.

Dolby Digital :

• The default setting is BITSTREAM.

(BITSTREAM : Output by Dolby Digital)
(DPCM : Convert the Dolby Digital to D-PCM)
Set to BITSTREAM when the unit is connected to
Dolby Digital Decoder.

DTS:

• The default setting is OFF.

Set to ON when the unit is connected to DTS Decoder.
(ON: Output by DTS)

MPEG:

• The default setting is OFF.

(ON : Output by MPEG sound)
(OFF: Convert the MPEG to PCM)
Set to ON when the unit is connected to MPEG Decoder.

DOWN SAMPLING:

• The default setting is AUTO.
• Press 

ENTER

, then 

K

or 

L

to select AUTO, 48kHz or

96kHz. Press 

ENTER

again to confirm selection.

• Select 96kHz if the disc was recorded in PCM 96kHz,

otherwise select 48kHz.

Press 

SETUP

to exit.

4

3

2

1

Audio Setting

– 18 –

EN

DVD SETUP

Adjust the Black Level Settings to make the black parts of
the picture as bright as you preferred.

During playback, press 

MODE

.

Press 

ENTER

repeatedly to select ON or OFF.

ON: makes the dark parts brighter.
OFF: shows the original picture as recorded.

2

1

Black Level Setting

E56B5AD.QX3  02.8.24 11:18 AM  Page 18