background image

1-8-3

E5752TS

Yes

Yes

Yes

Yes

Yes

Yes

No

No

No

No

No

No

FLOW CHART NO.13

The fluorescent display tube does not light up.

Is the voltage of 3.3V supplied to Pin(6) and 
Pin(24) of IC2001?

Is the voltage of -24V supplied to Pin(15) of 
IC2001?

Is there 500kHz oscillation at Pin(26) of IC2001?

Check the signal lines of FP-DIN, FP-DOUT, 
FP-CLK, FIP-STB of IC2001 and CN1001?

Are the filament voltage supplied between 
Pins(1, 2) and Pins(34, 35) of the fluorescent 
display tube? And the negative voltage applied 
between these pins and GND?

Replace the fluorescent display tube.

Yes

Replace IC2002.

Check the EV+3.3V line, and service it if defective.

Check the -FL (-24V) line, and service it if defective.

Check PWRCON line, 
and service it if defective.

Check R2015, IC2001 and their periphery, and 
service it if defective.

Is the "H" signal inputted 
at base of Q1016?

Check or replace IC2001 and its periphery, and 
DVD Main CBA unit, and service it if defective.

Check or replace the power circuit, D1016, D1017, 
T1001, and their periphery, and service it if defective.

Is the voltage of -17V supplied to the collector of 
Q1005?

FLOW CHART NO.14

The key operation is disabled.

Is key switch contact (SW2001-SW2003, 2005, 
2006, 2008) and installation state normal?

Is the control voltage normally inputted into  
Pins(7, 8) of IC2002?

Check the key switches (SW2001-SW2003, 2005, 
2006, 2008), and their periphery circuit, and 
service it if defective.

No

Service or replace some poor switches.

No

Yes

Yes

No

Check or replace Q1015, Q1016, D1055, and 
their periphery, and service it if defective.

0.49

(V)

1.49

2.42

3.20

4.10

PLAY

POWER

-----

-----

OPEN/CLOSE

-----

PAUSE

STOP

SKIP-UP

SKIP-DOWN

Terminal voltage of IC2002-7,8

KEY-1

IC2002-7

KEY-2

IC2002-8

FLOW CHART NO.12

EV+1.5V is not outputted. 

Is 2.5V voltage supplied to Pin(1) of IC1002?

Is 1.25V voltage supplied to Pin(4) of IC1002?

Replace IC1002.

Replace IC2002.

Check the circuit between Pin(19)
of IC2002 and Pin(4) of IC1002, 
and service it if defective.

Check D1006, C1014 and the periphery circuit.

Is the "L" pulse outputted to Pin(19) of IC2002?

Yes

Yes

Yes

No

No

No

Summary of Contents for DV-SL10H


































































Reviews: