EN-10
ENGLISH
Water Tank
(About once a week)
BACK PANEL / SENSOR
(About once every 2 weeks)
MAIN UNIT
(About once a month)
CARE AND MAINTENANCE
Remove the dust
gently with a
cleaning tool such as
a vacuum cleaner.
Wipe with a dry, soft cloth.
The fi lter is fragile, so be
careful not to give too much
pressure.
Remove the dust on
the Mold Filter.
CAUTION
Do not wash the fi lter. Do not expose to sunlight.
(Otherwise the fi lter may lose effi cacy.)
MOLD FILTER
(About once a month)
LIFE OF FILTERS
Filter life varies depending on the room environment,
usage conditions, and location of the Main Unit.
We recommend replacing the fi lter more frequently
if the Main Unit is used in conditions signifi cantly
more severe than a normal household.
•Mold Filter
About 1 years after opening
Replacement Filter Model
Consult your dealer when purchasing
a replacement fi lter.
Mold Filter
(1 unit)
FZ-J27KFE
Disposing of fi lter
Dispose of used fi lter according to
local laws and regulations.
Mold Filter material:
• Polypropylene • Polyethylene
FILTER REPLACEMENT
Do not wash with water.
1.
Remove the Tank Cover, and dispose
of the water.
▶
Tank Cover
2.
Wash the inside of the Water Tank.
NOTE
• If the dirt is heavy, please dissolve neutral
detergent in lukewarm water and wash.
3.
Dry the tank with a soft cloth.
Check the fl oat.
4.
Install the Tank Cover.
NOTE
How to clean and remove a heavy dirt.
Back Panel
1. Add a small amount of neutral
detergent to water and soak for
about 10 minutes.
CAUTION
Do not give excessive pressure to
the back panel when scrubbing it.
2.
Rinse off the neutral detergent with
clean water.
3.
Completely dry the fi lter in
a well
-
ventilated area.
Summary of Contents for DW-P22A
Page 15: ...EN 13 ENGLISH ...
