Sharp EL-9650 Operation Manual Download

Page: 197 / 373

187

STATISTICS/ REGRESSION CALCULATIONS

for US

2. Press

to obtain the answer as shown to

the right.

indicates the success probability obtained from the

sample data.

[11 Ztest2prop]

Executes comparative test for the success probability, (P1, P2), obtained from two sets
of sample data collected from two different populations.

<Example11>

Here, we will test the success probability of P1 and P2 using the hypothesis, P1 < P2,
for the two sets of sample data n

= 50, x

= 16 and n

= 20, x

= 5.

1. Press

to input each parameter (as

shown to the right).

2. Press

to obtain answer as shown to the

right.

The answer is given using two screens.

indicates the calculated success rate of sample data 1

and 2 combined.

and show the success rates of each set of sample

data.

“n1” and “n2” are positive integers.

EL-9650-(07)En (178-196)

8/1/00, 9:08 AM

187

Summary of Contents for EL-9650






















































































































































































































































































































































































Search results

Summary of Contents for EL-9650

Reviews:

Related manuals for EL-9650

Brands by name

Popular brands

Sharp EL-9650, Operation Manual

Search results

Summary of Contents for EL-9650

Reviews:

Related manuals for EL-9650

Brands by name

Popular brands