8 |
P a g e
Power Switch/ Print/ Item Count Mode Selector
“OFF”: Power off.
“
”: Power ON. Set to the non-print mode.
“P”: Power ON. Set to the print mode.
“P•IC”: Power ON. Set to the print and item count mode.
1.
The counter will count the number of times that the
key
has been pressed in addition.
Note:
•
Each time the
key is used in subtraction, 1 will be
subtracted from the count.
•
The count is printed when the calculated result is obtained.
•
Pressing of the
,
,
,
or
key clears the
counter.
2.
When the grand total/rate setting mode selector is in the ON
position (GT), the counter will count the number of times that
the calculation results have been stored in the grand total
memory. To print and clear the count, press the
key.
3.
The memory item counter will count the number of times that
the
key has been pressed in the addition.
Note:
•
Each time the
key is used in the subtraction, 1 will be
subtracted from the count.
•
The count is printed when the memory is recalled.
•
Pressing of the
key clears the counter.
Summary of Contents for EL1197PIII - Printing Calculator, 12-Digit
