6. Dial the speed selector to your desired setting and the appliance will start working.
There are 5 settings and the speed will achieve the highest if the turbo button is
depressed at any time.
Warning: Do not place knife, metal spoon, fork and so on into bowl when
operating.
7. The max operation time per time shall not exceed 10 minutes,
and minimum 20
minutes rest time must be maintained
between two consecutive cycles. When
kneading yeast dough, we suggest that the speed selector should be at low
speed firstly and then use high speed to achieve the best results.
8. When mixing is completed, turn the speed selector to 0 position, unplug the cord
from power outlet.
9. If necessary you can scrape the excess food particles from the beaters or dough
hooks with a spatula.
10. Lift the head of mixer, hold the beaters/dough hooks with one hand and press the
ejector button firmly down with other hand, remove the beaters/dough hooks.
Note: Remove the beaters/dough hooks only at the 0 setting.
11. The hand mixer can be used separately without the base in position.
12. Do not operate the appliance for other than its intended use.
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait it completely cool down before cleaning.
Caution: The mixer cannot be immersed in water or other liquid.
2. Wipe over the outside surface of the head and Base with a dampened cloth and polish
with a soft dry cloth.
3. Wipe any excess food particles from the power cord.
4. Immerse the mix bowl, beaters and dough hooks in warm soapy water for complete
5
