background image

Secret codes to control access to the PGM1 mode, X1/Z1 mode and X2/Z2 mode 
(#2630, 2631, 2632) ·····························································································································63
Currency description text programming  (#2334) ·················································································63
Functional programming for the printer (#2990) ···················································································64
Assigning the drawer number to the drawer for foreign currency  (#2680) ··········································64
Setting the AUTO key - Automatic sequencing key - (#2900) ······························································65

11  Reading stored programs ························································································································66

Program details and procedures for their reading ················································································66
Sample printouts···································································································································67

12  Training mode··········································································································································72

READING (X) AND RESETTING (Z) OF SALES TOTALS·················································································73

1  Summary of reading (X) and resetting (Z) reports and the key operations to obtain the reports ············73
2  Automatic modification of register system for introduction of EURO ·······················································75
3  Daily sales totals······································································································································76

Full reading and resetting of sales totals ······························································································76
Cashier reading and resetting ··············································································································79
Clerk reading and resetting ··················································································································80
Reading and resetting of hourly sales information ···············································································81
Full department reading ·······················································································································82
Individual group reading ·······················································································································83
Full group reading·································································································································83
Reading and resetting of sales information for a range of PLUs/subdepartments ·······························84
Reading of sales information on PLUs/subdepartments associated with an individual department·····85
Reading of sales information on PLUs/subdepartments whose sales amounts are zeros···················85
Reading of sales information for the price amount range of PLUs/subdepartments ····························85
Reading of commission sales information ····························································································85
Transaction reading······························································································································86
Total in drawer reading·························································································································86
Reading and resetting of a stacked report····························································································86

4  Periodic consolidation······························································································································87

Generality ·············································································································································87
Reading and resetting of daily net totals ······························································································88
Reading and resetting of a stacked report····························································································88

COMPULSORY CASH/CHEQUE DECLARATION ·····························································································89
OVERRIDE ENTRIES ··········································································································································91
CORRECTION AFTER FINALIZING A TRANSACTION (AFTER GENERATING A RECEIPT)························92

PRIOR TO ENTRIES ···········································································································································93

1  Preparations for entries ···························································································································93

Receipt and journal paper rolls·············································································································93
Receipt ON/OFF function ·····················································································································93
Cashier and clerk assignment ··············································································································93

2  Error warning ···········································································································································94

ENTRIES ······························································································································································95

1  Item entries ··············································································································································95

Single item entries ································································································································95
Repeat entries ······································································································································96
Multiplication entries ·····························································································································96
Successive multiplication entries··········································································································97
Split-pricing entries ·······························································································································98
Single item cash sale (SICS)/single item finalize (SIF) entries·····························································99
Link PLU entries ···································································································································99

2  Displaying subtotals·······························································································································100

Normal subtotal ··································································································································100

FOR THE OPERATOR

4

Summary of Contents for ER-A450


































































































































Reviews: