Sharp ER-A771 Instruction Manual Download

Page: 208 / 247

206

Tax Programming

Use the following procedure to select any option included in the tax group:

In the SETTING window, select “16 TAX.”

• The TAX window will appear.

Select any option from the following options list:

1 TAX1

Tax 1

2 TAX2

Tax 2

3 TAX3

Tax 3

4 TAX4

Tax 4

5 TAX5

Tax 5

6 TAX6

Tax 6

If the

key is pressed on the tax number selection menu, the

tax rate in the cursor position will be deleted.

Program each item as follows:

• RATE SIGN (Use the selective entry)

–: Minus rate
+: Plus rate

• TAX RATE (Use the numeric entry)

Tax rate (max. 7 digits: 0.0000 to 999.9999%)

• LOWER TAX LIMIT (Use the numeric entry)

Lowest taxable amount (max. 5 digits: 0.01 to 999.99)
• This option is not available in the VAT system.

NOTE

Procedure

Summary of Contents for ER-A771
























































































































































































































































Search results

Summary of Contents for ER-A771

Reviews:

Related manuals for ER-A771

Brands by name

Popular brands

Sharp ER-A771, Instruction Manual

Search results

Summary of Contents for ER-A771

Reviews:

Related manuals for ER-A771

Brands by name

Popular brands