Sharp ES-NIB814BWB-DE, User Manual

EN - 17

5.7 

Additional Functions 

1. 

Temperature Selection

Use the washing water temperature 

adjustment button to alter the automatically 

programmed washing water temperature.

When you select a programme the 

maximum temperature for that programme 

is automatically selected. To adjust the 

temperature, press the water temperature 

adjustment button until the desired 

temperature is displayed on the digital 

display.

You can gradually decrease the washing 

water temperature between the maximum 

washing water temperature of the selected 

programme and cold washing (- - C) 

selections by pressing the temperature 

adjustment button.

2. 

Spin Speed Selection 

When you select a programme, the 

maximum spin speed is automatically 

selected. 

To adjust the spin speed between the 

maximum spin speed and the cancel 

spinning option (- - -), press the Spin speed 

button until the desired speed is displayed.

If you have skipped the spin speed you 

want to set, keep pressing the spin speed 

adjustment button until the desired spin 

speed is displayed again.

3. 

Delay Timer

You can use this auxiliary function to delay 

the start time of the washing cycle for 1 to

23 hours .

To use the delay function:

•  Press the delay key once.
•  “01h” will be displayed.   will light up on 

the electronic display.

•  Press the delay key until you reach the 

time after which you want the machine 

to start the washing cycle.

•  If you have skipped the delay time you 

would like to set, you can keep pressing 

the delay key until you reach that time 

again.

•  To use the time delay function, you need 

to press the Start/Pause key to start the 

machine.

•  If you want to cancel the delay:

 - If you have pressed the Start/Pause 

key to start the machine, you just 

need to press the delay key once.   

will go off on the electronic display.

 - If you have not pressed the Start/

Pause key, press the delay key 

continuously until   goes off on the 

electronic display.   will go off on 

the electronic display.

NOTE

: In the case that you want 

to select the auxiliary function feature, if the 

auxiliary function LED is not on, this means 

that this feature is not being used in the 

washing programme you have selected.