Sharp ES-NIB814BWB-DE, User Manual

EN - 19

displayed.

NOTE:

 If you put less than 

half the maximum load of laundry into 

your machine the half-load function will 

be automatically set, regardless of the 

programme you selected. This means 

that the selected programme will take less 

time to complete and will use less water 

and energy. When your machine detects 

half load, the 

  symbol is displayed 

automatically.

10. 

No Spin(*)

Auxiliary function button 

4 or 5 

No Spin

If you don’t want to perform wringing on 

your laundry, you can use this auxiliary 

function. You may make the programme 

active by pressing the wringing cancel 

button on the display panel when the led 
light of the   symbol turns on.

11. 

Cold Wash(*)

Auxiliary function button 

4 or 5 Cold Wash

You can use this auxiliary function when

you want to wash your laundry with cold

water (tap water). You may make the 

programme active by pressing the cold 

washing button on the display panel when 

the led light of the 

 symbol turns on.

(*)Machinery specifications may vary 

depending on the product purchased.

Start/Pause button

By pressing on the Start/Pause button, 

you may start the programme you 

have selected or suspend a running 

programme. If you switch your machine to 

the standby mode, the Start/Pause led on 

the electronic display will blink.

5.8 

Child Lock

The Child Lock function allows you to 

lock the buttons so that the wash cycle 

you have chosen cannot be changed 

unintentionally.

To activate child lock, press and hold 

button 4 and 5 simultaneously for at 

least 3 seconds. ‘’CL’’ will flash on the 

electronic display for 2 seconds when the 

child lock is activated. 

If any button is pressed or selected 

programme is changed by the programme 

dial while the child lock is active, the “CL” 

symbol will flash on the electronic display 

for 2 seconds.

If the child lock function is active and 

a programme is running, when the 

programme dial is turned to the CANCEL 

position and another programme 

is selected the previously selected 

programme continues from where it was 

left. 

To deactivate the child lock, press and 

hold button 4 and 5 simultaneously for at 

least 3 seconds until the “CL” symbol on 

the electronic display disappears.