Sharp FO-2550 Operation Manual Download

Page: 117 / 422

FO2150A-BOVC

<P=001>

Making Voice Calls

The Sharp Colour MFP can be used like a regular telephone to make
and receive voice calls.

♦

To make or receive a phone call, the power must be on.

Pick up the handset or press the
SPEAKER key. Listen for the dial
tone.

Dial the number using one of the
following methods:

••

Normal Dialling: Enter the full

telephone number with the numeric
keys.

••

Rapid Key Dialling: Press the

appropriate Rapid Key (if the Rapid
Key number is from 20 to 38, press
the SHIFT key first).

••

Speed Dialling: Press the SPEED

DIAL key, and enter the 2-digit
Speed Dial number with the
numeric keys.

Speak with the other party when they
answer.

••

If you pressed the SPEAKER key,

pick up the handset to talk.

Note: While the handset of the Sharp Colour MFP is lifted (off

hook), an extension phone connected directly to the Sharp Colour
MFP cannot be used to speak with the other party.

6-2

Summary of Contents for FO-2550







































































































































































































































































































































































































































Search results

Summary of Contents for FO-2550

Reviews:

Related manuals for FO-2550

Brands by name

Popular brands

Sharp FO-2550, Operation Manual

Search results

Summary of Contents for FO-2550

Reviews:

Related manuals for FO-2550

Brands by name

Popular brands