70
Gallery
To Call the Entry
When Chinese charactor was entered after two
characters, following entry word appears at once.
Please ref Spec for operation
The following is an example of calling My Chinese
Beloved.
Please notice the word
is already
stored at this example.
1.
Press 6 (3 times quickly)
then Press and hold 1 and enter
“
”.
2.
The character “
” appears at
.
Normally “
” appears here.
3.
Long press and enter “
”.
4.
Long press
then the following characters
appear.
Note
• This function doesn’t appear, if the entry word was
made by less than 4 letters or no Chinese characters
included.
Though, you can use this as a shortcut if the word was
created by Chinese character, since canditate
character appears at so you only have to push
without searching for following characters.
• If there were a stored word which shares the first 1-4
character such as “
”, canditate “
”
appears at or .
The latest entry comes to , and if there were three or
more entry starts with “
”, old canditate appears at
in lower list, and so on.
• If there were a stored word which shares the first 5 or
more characters, such as “
”, after
“
” was entered, the latest character of entry
completes.
This example is using
BoPoMoFo mode