background image

70

Gallery

Finding an Entry

You can recall Chinese word entries by entering the 
first few characters.
The following is an example from the Chinese User 
Dictionary.
Please notice the word 

 is already 

stored at this example.

1.

Press 6 (3 times quickly) 
then Press and hold 1 and enter 

”.

2.

The character “

” appears at 

.

Normally “

” appears here.

3.

Long press   and enter “

”.

4.

Long press   
then the following characters 
appear.

Note

• This function doesn’t appear, if the entry word was 

made by less than 4 letters or no Chinese characters 
included.
Though, you can use this as a shortcut if the word was 
created by Chinese character, since candidate 
character appears at   so you only have to push   
without searching for following characters.

• If there were a stored word which shares the first 1-4 

character such as “

”, candidate “

” 

appears at   or  .
The latest entry comes to  , and if there were three or 
more entry starts with “

”, old candidate appears 

at   in lower list, and so on.

• If there were a stored word which shares the first 5 or 

more characters, such as “

”, after 

” was entered, the latest character of entry 

completes.

This example is using 

BoPoMoFo mode

Summary of Contents for GX-T17
































































































































Reviews: