2 – 33
GX10i
CONFIDENTIAL
3. Tests
3.1 BAND Select & Channel
Select a band and a channel to test. Settings are applied to all tests.
Band selection
Input box
Channel bar
Figure 68
[Procedure]
1. Select a band. (GSM or DCS)
2. Select or enter a channel using Channel bar or Input box.
3.2 TX test
Test burst transmission.
PCL bar
TX frequency of selected channels
Current PCL (Read only)
TX ON/OFF button
This indicator appears during
burst transmission.
Data patterns
Figure 69
[Procedure]
1. Select a band and channel. (see 3.1)
2. Select PCL (Power Control Level) using PCL bar.
3. Select Data pattern.
4. Click TX ON to start burst transmission.
(You can check each part in this state.)
5. Click TX OFF to end burst transmission.
* Data pattern (TSC 5) includes Training Sequence GSM 5, and other part is pseudo random data.
* There may be a slight difference between the power of burst transmission with this tool and that of actual calls. (approximately
0.1dB within PCS bandwidth.)
