Fun & Games
103
2.
Press
or
to highlight “Backlight”, then press
to select.
3.
Press
or
to highlight “On/Off”, then press
to select.
4.
Press
or
to highlight “On”, “Off” or
“Normal Settings”, then press
to select.
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
1.
Perform steps 1 and 2 in “Backlight” on page 102.
2.
Press
or
to highlight “Blink”, then press
to select.
3.
Press
or
to highlight “On” or “Off”, then
press
to select.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the application, you
can operate the vibrator set in the SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a music data format for mobile phones.
1.
Perform steps 1 to 4 in “Operation Priority” on
page 101.
2.
Press
or
to highlight “Vibration”, then press
to select.
3.
Press
or
to highlight “Enable”, “Disable” or
“Link to Sound”, then press
to select.
When you set “Link to Sound”, the application is
synchronised with the vibrator.