E-11
Notes:
●
The operation range between
this unit and a Bluetooth device is
approximately 10 meters (without
any object between the Bluetooth
device and the unit).
●
Before you connect a Bluetooth
device to this unit, ensure you know
the device’s capabilities.
●
Compatibility with all Bluetooth
devices is not guaranteed.
●
Any obstacle between this unit and
a Bluetooth device can reduce the
operation range.
●
If the signal strength is weak, your
Bluetooth receiver may disconnect,
but it will re-enter pairing mode
automatically.
●
Bluetooth pairing from your device
to this unit can be done during stand
by and power on mode. However,
Bluetooth playback from the source
device is applicable at Bluetooth
function only.
1.
Press and hold the RIGHT button
for about 3 seconds to power on
and it will auto reconnect to the
Bluetooth enabled device that was
last connected. If there is no paired
record, it will automatically enter
pairing mode after power on.
2.
Turn on your Bluetooth device and
search for “HP-BC50 SHARP”.
3.
Begin playing music from the
connected Bluetooth source device.
To disconnect the Bluetooth function,
you can:
●
Disable the Bluetooth function
on your device. The device is
successfully disconnected from the
unit when the blue and red indicator
blinks alternately.
Bluetooth connection
Bluetooth pairing
