GB
108
CHANNEL SETTING
Function Setting
PRESET
• This lets you preset the channels into memory. A maximum of 84
channels can be preset.
CHANNEL
• For details, see “CHANNEL SETTING” on page
30
.
FINE TUNING
• This lets you obtain sharp colour picture.
DECODER
• If there is a separate decoder connected to the L2 terminal of the
Recorder, set this function to “ON” in order to record the unscrambled
signal and/or watch it on your TV.
SKIP
• This determines whether the channel can be selected when using
CH
'
'
'
'
'
/
"
"
"
"
"
instead of
Number
buttons.
SYSTEM
• This lets you select the broadcast system (SECAM-L,PAL B/G or PAL D/K)
DELETE
• This lets you delete a channel from the Recorder memory.
NAME
• When your Recorder tunes in broadcast channels automatically, it
names them using the VPS/PDC information. The “NAME” function
lets you change the name of the channel.
NICAM
• This recorder can receive and record NICAM or A2 broadcasts.
NICAM broadcasts will be received when “AUTO” is selected in the
NICAM setting. Depending on the received programme, some
NICAM or A2 broadcasts may not be in stereo.
PROGRESSIVE OUT SET
(PROGRESSIVE OUTPUT SETTING)
• If this is set as “YES”, conventional (interlaced scan, 625i) image is
converted into progressive scan (625p) when DVD is played back.
• Set this as “NO” if the Recorder is connected to TV which is not
compatible with progressive scan.
• Progressive output does not work unless the Recorder is connected
using a component video cable.
VIEW/PLAY SET
1 - 84
ON
OFF
CHXX
ON
OFF
*
1
For details, see page
30
.
*
2
For details, see page
109
.
*
3
When “RGB” is selected for “L1 OUT” setting, progressive output does not work (Page
111
).
AUTO
OFF
PROGRESSIVE
OUT SET
*3
YES
NO
MANUAL TUNING
*1
NICAM
*2
L
B/G
D/K
Some progressive scan TVs are not fully compatible with the Recorder, which may cause image distortion. In this case,
switch “PROGRESSIVE OUT SET” from “YES” to “NO”.
HR480F_GB -107-116
05.3.23, 2:07 PM
108
All manuals and user guides at all-guides.com