9
8
7
6
5
4
3
2
1
9
E-20
2011 January 27
HT-SB600
You can operate Sharp TVs with this system’s remote
control.
Other operable button
Timer operation (Remote Control only) (continued)
After completing the setting
When the timer settin
g
is
completed:
The unit is in the timer
playback stand-by mode.
When the start time is
reached:
Unit starts automatically
and the volume
increases gradually.
The unit is operated by
the timer.
Timer LED indicator
flashes
TIMER
When the finish time is reached:
The unit is set to the power stand-by mode
automatically.
To check the timer settin
g
:
1. While in the timer playback stand-by mode, press the TIMER
button.
2. Within 10 seconds, press the
or
button to select “TIMERCAL”,
and press the ENTER button.
The unit returns to the timer playback stand-by mode after the setting
contents are displayed in order.
The timer setting is canceled.
Cancelin
g
the timer playback:
Timer playback is canceled by turning the power on while in the timer
playback stand-by mode. The same operation can be performed in the
following procedure without turning the power on.
1. Press the TIMER button. “TIMEROFF” will appear.
2. Within 10 seconds, press the ENTER button. Timer playback will be
canceled (the contents of the setting will not be canceled.)
Reusin
g
the timer:
Usin
g
the same settin
g
;
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
1. Turn the power on and press the TIMER button. “STANDBY” will
appear. If it does not appear, set the unit to the correct time.
2. Within 10 seconds, press the ENTER button. After the setting
contents are displayed in order, the unit is set to the timer playback
stand-by mode.
Chan
g
in
g
the settin
g
;
Turn the power on, and repeat the operation from step 1 in “Setting
the timer” (page 19).
Operatin
g
the TV with the remote control
Point the remote control at the TV.
1
Press the TV ON/STAND-BY button to turn on the
TV.
2
Pressin
g
the TV CH
or
button enables TV
channel
switchin
g
.
3
Press the TV VOL. + or - button to adjust the TV
volume.
Watchin
g
TV
Input Select Button
