E-10
System connections (continued)
■
Optical input
Remove the protective cap of the OPTICAL ter-
minal, then connect an OPTICAL cable (not in-
cluded) to the TV’s OPTICAL OUT terminal and
the OPTICAL terminal on the sound bar.
Note:
While in HDMI ARC or OPTICAL mode, if there’s
no sound output from the sound bar and the HDMI
ARC or OPTICAL indicator blinks quickly, you may
need to activate Dolby Digital or PCM signal output
on your source device (eg. TV, DVD or Blu-ray play-
er).
■
Audio In
HDMI (ARC)
USB
AUDIO
IN
OPTICAL
IN
A
B
AUDIO
IN
< 21 mm
A. Use a 3.5mm to 3.5mm audio cable to con-
nect the TV’s or external audio device head-
phone terminal to the Audio In terminal on
the sound bar.
B. Use an RCA to 3.5 mm audio cable (not in-
cluded) to connect the TV’s audio output ter-
minals to the Audio In terminal on the sound
bar.
Note:
When you use the headphone output on the TV
set, you will be able to adjust the volume level di-
rectly using the TV remote control, depending on
the TV model.
L-shaped adaptor or cable head is recom-
mended for wall mount installation.
