E-10
REPLACEMENT GUIDE
Be sure to stop operation before replacement.
Squeeze
Pull
SPECIFICATIONS
* It is the value measured at approximately 80cm point in wind blowing direction from air
outlet when the product is operated with a stand opened.
IG-DM1A
Accessories
AC adapter
USB cable
С
leaning brush Storage pouch
AC adapter
Power input: AC220V, 50Hz 0.3A
Power output: DC5V 2A
Lithium-ion rechargeable battery: IZ-BTDM1E
Voltage: DC3.7V Capacity:
700mAh
Approx. 25,000 ions/cm
3
3.3W when an AC adapter is used (max)
(470mA when a USB connector is connected) (max)
28dB
Approx. 4 hours (when it is used at 20°C)
Approx. 2 hours 45 min. (when it is charged at 20°C)
75mm(W) x 97mm(H) x 27mm(D) (Not including Projection part)
Approx. 110g (Not including AC adapter, USB cable and cleaning brush)
Approx. 1.8m
Model
Power supply
Ion density
*
Power consumption
Operating noise level
*
Continuous operating time
Charging time
Outer dimensions
Weight
Length of USB cable
Remove the Back Panel
1
Replace with a new
Plasmacluster Ion
Generating Unit or
Rechargeable battery
2
Plasmacluster Ion
Generating Unit
Rechargeable
battery
(After replaced, reattach the Back Panel)
Attach it from the
terminal side.
A l i g n t h e
▲
m a r k o n
the main unit with the
▲
mark on the rechargeable
battery, and attach it from
the terminal side.
Back Panel
IG-DM1A.EN.indd 12
IG-DM1A.EN.indd 12
2012/01/23 16:46:30
2012/01/23 16:46:30
