manualshive.com logo in svg

Sharp IQ-8900, Operation Manual

The Sharp IQ-8900 Operation Manual is your essential companion for mastering the full potential of this innovative product. Offering step-by-step instructions and troubleshooting tips, this manual ensures smooth operation for users. Download it for free at 88.208.23.73:8080 and unlock the true power of the Sharp IQ-8900.

Share
Download
background image

The unit does not have an automatic redial function when
faxing. If the line is busy, “A line error has occured!” will

be displayed and faxing will be terminated.

Making
other
changes
to the

number

In step 3 above, you may want to make other changes to

the fax number or type in another number altogether. To

do so, simply enter any number from the keypad (or

keyboard) and then touch 

 You can also use

speed buttons to use predefined numbers or to add credit
card codes in the dialing sequence (see Speed buttons

later in this chapter).

First repeat steps 1 and 2 above.

For example, you may want to add a “9” prefix before the
number to get an outside line from within a company
phone system. To add a “9” to the number,

3. Touch 

 on the touch pad (or on the keyboard). The

number will appear in the top line of the display.

4. Press 

 on the keyboard. This adds a one-half

second dialing pause.

5. Touch the displayed fax number. It will be added to the

confirmation box after the “9,“. Note the fax number is
adjusted if LOCAL or USE 1 + NUMBER is checked.’

Note that the LOCAL selection may not work correctly in

some areas.

6. Touch 

 . The unit will now dial the number in the

confirmation box and begin faxing automatically.

Sending
a fax
(Manual
dialing)

In some instances you may want to dial a fax number

manually, allowing you to hear the dial tone and other

dialing sounds. Dialing manually with the unit is just like

pressing SPEAKER on a conventional fax machine and

then dialing. Note that you must have a connection with
the receiving FAX machine and hear a fax tone before
touching 

 .

To send a FAX manually,

233

Summary of Contents for IQ-8900



































































































































































































































































































































Reviews:

No comments

Related manuals for IQ-8900

Casio SF-9300 Owner'S Manual preview
SF-9300
Brand: Casio Pages: 83
Karce KD1088 Manual preview
KD1088
Brand: Karce Pages: 14

Brands by name

Popular brands

Load more brands