Sharp IQ-8900 Operation Manual Download

Page: 247 / 322

Place the two units so that their

and within 80 cm of each other.

infrared ports are in line

Do not leave the unit cover more than three-quarters
open during transfer or it will break the infrared transfer.

When transferring entire applications or files, or entries

marked as secret, both units must be unlocked (see

282).

Although infrared transfer requires no special hardware,

it is easily affected by ambient conditions and other

factors such as external light, undercharged batteries,

large transfer distance, transfer angle, etc. As a result,

while infrared transfer is in itself quite easy, there is
considerable scope for errors, failure to transfer data

and incomplete data transfer (missing data). It is

therefore recommended that you confirm the received
data after an infrared transfer.

Avoid direct sunlight.

Keep the infrared port clean with a soft, dry cloth. Dust
on the port will make transfer difficult.

Transferring single entries

Single entries can be transferred in all applications.

Turn on both units.

On the sending unit, select the entry you want to send in
the Index mode or display it in the View mode.

246

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands