E-7
PREPARATION
1
2
3
4
Remove the Back Panel.
Remove the plastic bag
shown.
Install the Back Panel.
OPERATION
START
STOP
The fan speed is automatically controlled depending on the
5 detection. (PM2.5 / Usual dust / Temperature /Humidity /
Light)
The unit releases Plasmacluster ions with strong airflow
and collects dusts while decreasing static electricity for
10 minutes. After that, the DUST sensor sensitivity is
automatically set to “HIGH” and quickly detects impurities
and clean the air powerfully for 50 minutes.
• When the operation finishes after 60 minutes, the unit will
return to the prior operation mode. It is able to change the
other mode during this mode.
• The Plasmacluster Ion can not be turned “OFF”. (Ref.E-9)
NOTE
2
1
3
3
Back Panel
HEPA Filter
Deodorizing Filter
The fan speed is automatically controlled depending on the 7
detection. (Ref.E-1)
Click
Deodorizing Filter
HEPA Filter
Tag
•
Front Display, Cleanliness Monitor and Air Outlet LED
automatically switch ON and OFF based on room
brightness. (When light control is set to "Auto". Ref.E-10)
NOTE
NOTE
• When replacing the filter, making a memo of the start of
use date is recommended.
START/STOP
SAND MODE
AUTO MODE
(KC-G40)
INTELLIGENT MODE
(KC-G60 / KC-G50)
FILTER INSTALLATION
Always be sure to remove the
power plug from the wall outlet.
