EN
setting on this cooking zone. If the
Boost Function is active, a "P" is
displayed on the corresponding
display.
Activating the booster can exceed the
maximum power and the integrated
power management will be activated.
The necessary power reduction
is shown by the blinking of the
corresponding cooking zone display.
Blinking is active for 3 seconds and
allows further adaptations of the
settings before power reduction.
Boiling function**
This function allows for the boiling of
water and keeping it near the boiling
point . To activate the boiling function
press the heater selection key twice.
When the boiling function is active,
the related display shows a 'b'. After
boiling the water, the hob gives a beep
signal. This signal shows that the
boiling is finished
simmering is taking place.
The rear right heater display indicates
the boiling function
Frying function
This function provides the frying of oil
at around 160°C. To activate the frying
function, press the
heater selection key three times. When
the frying function is active, the related
display shows an 'F'. The hob gives a
beep signal after a while. This signal
shows the oil is ready to fry.
Front right heater display indicates the
frying function
Keep warm function**
This function ensures the dish is
automatically kept at a temperature
near 50°C . To activate the keep warm
function, press the heater selection
key four times. When the keep warm
function, the active related display
shows a 'u'.
The rear right heater display indicates
the keep warm function
Chocolate melting function
This function allows for the
melting of chocolate or similar
things automatically kept near the
temperature of 40°C .To
activate the chocolate melting function,
press the heater selection key five
