8
4 Assembling the Appliance
1. Inner Flue
2. Outer Flue
3. 2x M5x35 Screw
4. Product Hanging Plate
5. Body
Figure 3 : Installation Diagram and Components
6. 3x 5.5x60 Wall Mount Screw
7. 3x Ø10mm Plastic Dowel
8. 2x 3.9x22 Screw
9. Flue Connection Plate
10. 2x Ø6mm Plastic Dowel
Affix the assembly pattern on the wall, at the specified
height (See the minimum and maximum distances
intended for the worktop, in the assembly pattern).
Perforate points A, B and C (Figure 3).
Insert Ø10mm dowels (10) into the holes drilled as A,
B, C, and screw down the screws at the points A + B
so that 5mm space remains between the screw head
and the wall (Figure 3).
Affix the hanging plates (4) of the cooker hood on
the body of the cooker hood with M5x35 screws (3)
(Figure 3).
Hang it on the wall with the hanging plate of the
cooker hood. If the cooker hood is not parallel,
loosen or tighten M5x35 screws to make the cooker
hood parallel.
Tighten A + B 5 fixing screw (9) on the wall, and
completely secure the product from its point C.
