1. Upside down the rice cooker with inner pot inside.
2. Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.
3. Remove 2 screws holding the lead wires
from the heater plate ass’y.
4. Remove 3 screws holding the heater
plate ass’y from the outer pot.
5. Now the heater plate ass’y is free.
Heater plate ass’y
REMOVE OF HEATER PLATE ASSEMBLY
Screw
Outer pot
Screw
Fig. 5
8
1. Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.
2. Disconnect lead wires of the control panel.
3. Remove the nut holding the earth lead wire from the body.
4. Insert the fl at type screwdriver into the gap between the upper ring and the latch hook cover, to pry the latch
hook cover from the upper ring.
5. Detach the dew receiver from the upper ring.
6. Insert the fl at type screwdriver or similar to pry the claw of the hinge cover and remove it.
7. Remove 2 screws holding from the body.
8. Separate the body from the upper ring by rubber hammer knock the upper ring. (Fig. 6)
9. Remove the control panel in accordance with “REMOVE OF CONTROL PANEL”.
10. Now the body is free.
REMOVE OF BODY
Fig. 6
Latch hook cover
Body
Upper ring
Flat type screwdriver
Hinge cover
Dew receiver
Screw
Control panel
Body
Screw
Nut
(for earth lead wire)
Latch hook cover
Body
Flat type screwdriver
Upper ring
To knock
