7
1. Remove the bottom lid in accordance with “REMOVE OF BOTTOM LID”.
2. Remove the closed terminal holding all lead wires.
3. Disconnect the terminal from the micro SW. and remove the screw holding lead wire of warm heater ass’y
from the heater terminal.
4. Twist 2 claws of reflector and remove the warm heater ass’y.
5. Now the warm heater ass’y is free.
REMOVE OF WARM HEATER ASSEMBLY
Claw of reflector
Warm heater ass’y
Lead wire of warm heater ass'y
Lead wire of warm heater ass'y
Screw
Heater terminal
Lead wire yellow
Lead wire blue
Terminal
Micro SW.
1. Remove the bottom lid in accordance with “REMOVE OF BOTTOM LID”.
2. Fix the thermostat rod, pull the stop ring by using the pliers and straightening
2 claws of thermostat.
3. Remove the thermostat from the thermo plate. Fig 5.
4. Now the thermostat ass’y is free.
REMOVE OF THERMOSTAT ASSEMBLY
1. Remove the bottom lid in accordance with “REMOVE OF BOTTOM LID”.
2. Remove the screw and the nut holding the temp. fuse ass’y from the heater terminal and the plug pin.
3. Now the temp. fuse ass’y is free.
REMOVE OF TEMP. FUSE ASSEMBLY
Fig. 6
Fig. 8
Thermostat rod
Thermo plate
Stop ring
Claw of thermostat
Fig. 7
Temp. fuse ass’y
Nut
Screw
Plug pin
Heater terminal