tV menu
Fine tune analogue channels
You can manually fine tune analogue channels when
reception is poor�
Press
1�
menu
on the remote control and select
installation
>
Channel installation
>
analogue:
manual installation
>
Fine tune
.
Press
2�
≥
to enter the
Fine tune
menu.
Press
3�
<
or
>
to adjust the frequency.
Press
4�
≤
when done.
Select
5�
Store current channel
to store the fine
tuned channel under the current channel number.
Press
6�
≥
to enter.
Press
7�
oK
.
Done
appears.
Press
8�
menu
to exit.
rearrange channels
Press
1�
menu
on the remote control and select
installation
>
Channel installation
>
rearrange
.
Press
2�
≥
to enter the
rearrange
list.
Press
3�
<
or
>
in the
rearrange
list to select the
channel you want to rearrange.
Press the yellow button to move the channel
4�
up the list, or press the blue button to move the
channel down the list.
Press
5�
menu
to exit.
rename channels
Press
1�
menu
on the remote control and select
installation
>
Channel installation
>
rearrange
.
Press
2�
≥
to enter the
rearrange
list.
Press
3�
<
or
>
in the
rearrange
list to select the
channel you want to rename.
Press the red button. (
4�
rename
)
Press
5�
≤
and
≥
to select characters or
<
and
>
to change the characters. Space, numbers (0-9)
and other special characters are located between
z
and
a
.
Press the green button or
6�
oK
to finish.
note
Delete all characters by pressing the yellow button� Delete
•
only the highlighted character by pressing the blue button�
uninstall or reinstall channels
You can uninstall a stored channel or reinstall an
uninstalled channel�
Press
1�
menu
on the remote control and select
installation
>
Channel installation
>
rearrange
.
Press
2�
≥
to enter the
rearrange
list.
Press
3�
<
or
>
to select the channel you want to
uninstall or reinstall.
Press the green button to uninstall or reinstall the
4�
channel.
Press
5�
menu
to exit.
test digital reception
If using digital broadcasts, you can check the quality and
signal strength of digital channels� This allows you to
reposition and test your antenna or satellite dish�
Press
1�
menu
on the remote control and select
installation
>
Channel installation
>
Digital:
test reception
.
Press
2�
oK
.
Press the green button to automatically start
3�
the test or manually enter the frequency of the
channel you want to test. If the signal quality
and strength is poor, reposition the antenna or
satellite dish and retest.
When complete, press the yellow button to store
4�
the frequency.
Press the red button to return to the
5�
Channel
installation
menu.
Press
6�
menu
to exit.
note
If you have further problems with the reception of your
•
digital broadcast, contact a specialised installer�
Clear program list
You can erase the program list�
Press
1�
menu
on the remote control and select
installation
>
Channel installation
>
Clear
program list
.
Press
2�
menu
to exit.
24
