Sharp LC-32CFE6131E, User Manual

EN



What is included in the box

Supply of this TV includes following parts:

•  1x TV

•  1x RF cable

•  1x Remote control

•  1x TV stand installation packet

•  2x AAA batteries

•  1x User guide



Attaching the Stand

Please follow the instructions on last page of this user manual.



Getting started - initial set up

1. 

Using the RF cable supplied, connect the TV to the TV Aerial wall 
socket. Connect the power cable to the Electrical outlet.

2. 

For connecting to the Internet with a wired connection connect a 
Cat 5/Ethernet cable (not included) from the TV to your broadband 
modem/router.

3. 

Insert the batteries supplied into the Remote control. 

4. 

Press and hold GREEN and YELLOW buttons together for more than 
3 seconds to pair remote control with your TV. Then press Standby 
button to power on TV.

5. 

You will be now welcomed with the 

First Time Installation

 screen.

If it does not appear, on the remote control, please press [MENU] then 
8-8-8-8 and the menu will appear.

If you wish to make changes to any of the default settings, use the 
scroll 

▲/▼/◄/►

 buttons. To exit this menu at anytime, press [EXIT] 

button.

6.  Please set desired settings in FIRST TIME INSTALLATION screen.

DVB Antenna -

 You can choose between Terrestrial (DVB-T), Cable 

(DVB-C) or Satellite (DVB-S)*.

Language -

 Set the TV Menu language.

Country -

 Set the desired country.

Tunning Mode -

 Choose if you want to tune only Digital (DTV) 

Analogue (ATV) or both Digital and Analogue (DTV + ATV)

Operator - 

Select Cable provider. If your cable operator is not listed 

select Others. (Avaliable only if DVB Antenna is set to CABLE)

Environment - 

Select the location of TV.

For home use, please select Home Mode.
For shop demonstration mode, set Store Mode.

Sorting by LCN - 

Set LCN to ON if you want to arrange channels by 

provider preferences (only applies to DVB-T and DVB-C channels).

7.  Press [Auto Tuning] button to start the tuning process.
8.  Optional channel presets DVB-C:

Keep all default settings as  recommended.

If DVB-C channels are not found, contact your network provider for the 
valid "Network ID". Then perform a new search. Press the [MENU], select 
"Network ID" and enter the network ID. 

9.  Optional channel presets DVB-S2*:

 Select "Satellite" in the "DVB 

Antenna" in the menu for the optional channel presets. Here you can 
choose between the various satellites. Since selection completed, then 
the channel list of the exact satellite will be available to be imported 
into your TV system. 

Confi rm with [OK] button on the remote control, to start scanning.

TIP: 

If you are missing channels, the reason for this is likely to be signal 

strength, you should consider connecting signal booster and re-tuning the TV.

* - Available only for TVs with DVB-S tuner



Remote control

Radio controlled remote control - No more aiming in the TV direction!
Refer to remote control picture on the second page of this user 
manual.

1. 

 STANDBY –

 Switch on TV when in standby or vice versa.

2. 

 MUTE – 

Mute the sound or vice versa.

3.  NET+ –

 Displays AQUOS NET+ menu.

4.  RADIO –

 Switch to Digital and switch between TV and radio in Digital 

mode.

5.  USB – 

Switch to USB source.

6.  YouTube –

 Displays YouTube application YouTube – Displays YouTube 

application

7.  0 – 9 – 

to select a TV channel directly.

8.  TV GUIDE – 

Opens the 7 Day TV Guide (Digital mode).

9. 

 –

 To return to the previous channel viewed.

10.  VOL 

▲/▼

 –

 To increase / decrease the sound level.

11.  SOUND –

 Scrolls through sound mode options.

12.  PICTURE –

 Scrolls through picture mode options.

13.  SOURCE – 

To display the input/source menu.

14.  CH

 ▲/▼

 – 

To increase or decrease the channel being watched.

15.  (

▲/▼/◄/►

/ OK) – 

Allows you to navigate the on-screen menus and 

adjust the system settings to your preference.

16.  MENU –

 To display OSD menu.

17.  EXIT – 

To exit all menus.

18.  BACK –

 Back to previous menu.

19.  FAV –

 To display favourites menu.

20.  INFO – 

Press once for now/next channel information. Press twice for 

programme information about current programme.

21.  SLEEP – 

Press repeatedly to cycle through the sleep options.

22.  AUDIO – 

To change the audio language (if available).

23.  SUBTITLE – 

To switch the dialogue at the bottom of the screen (on/

off ).

24.  TEXT – 

Teletext mode - To enter Teletext

25.  TEXT HOLD – 

Teletext mode - Hold current page which is displayed

26.  ZOOM – 

To zoom in

27.   DISPLAY –

 To switch off  the screen when listening to radio

28.  Rec

1 

–

 PVR Record

29.  Rec List

1

–

 Opens the list of recordings.

30. 

 –

 To restart the current chapter

31. 

 –

 To advance forward to the next chapter

32.   –

 To stop the playback 

33. 

 –

 To play in fast rewind mode.

34. 

 –

 To play in fast forward mode.

35. 

 –

 To play/pause

36.  COLOUR BUTTONS

 –

 Additional teletext and OSD functions

1

 - available only with PVR function