background image

 

10

QUICK REFERENCE

If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.

Open the battery cover.

•  Place the batteries with their terminals 

corresponding to the (+) and (–) 

indications in the battery compartment.

NOTE

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•  Do not mix batteries of different types. Different types of batteries have different characteristics.

•  Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical 

leakage in old batteries.

•  Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can 

cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

•  The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•  If you will not be using the remote control unit for an extended period of time, remove batteries from it.

2

 Insert two “AA” size batteries 

(supplied with the product).

3

 Close the battery cover.

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.

If the POWER indicator on the television still does not light up, press 

POWER

 on the remote control to turn the 

power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE 

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

30°

30°

Remote control 

sensor

 17” (5 m)

52L0131A.indb   10

52L0131A.indb   10

4/9/09   9:52:18 AM

4/9/09   9:52:18 AM

Summary of Contents for LC 32DV27UT












































Reviews: