background image

 

15

H

 Fine sync. (PC input mode only)

Adjusting the PC image automatically

Auto sync.

This function enables the screen to be automatically 
adjusted to its best possible condition when the 
analogue terminals of the TV and PC are connected 
with a commercially available RGB cable, etc.

NOTE 

• Auto sync. is likely to succeed when an input PC image has 

wide vertical stripes (e.g. pattern with high contrast stripes, 
or cross-hatched). 

  It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before 

starting Auto sync.

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as 
necessary to change image position using Auto sync. 
In some cases, however, manual adjustment is needed 
to optimise the image.

Selected item

Description

H-Position

Centres the image by moving it to the left 
or right.

V-Position

Centres the image by moving it up or 
down.

Clock

Adjusts when the image fl ickers with 
vertical stripes.

Phase

Adjusts when characters have low contrast 
or when the image fl ickers.

NOTE 

• For resetting all adjustment items to the factory preset 

values, press 

a

/

b

 to select “Reset”, press 

ENTER

, press 

c

/

d

 to select “Yes”, and then press 

ENTER

.

• Images may not be displayed properly depending on the 

settings and/or input signals.

Input signal

• Some input signals may have to be registered 

manually to display properly.

• The pairs of input signals (resolutions) in the list below 

are not distinguishable when received. In such case, 
you have to set the correct signal manually. After 
setting once, it will display when the same signal 
(resolution) is input again.

 1280 

g

 768 

1360 

g

 768

Option menu (Continued)

H

 Digital audio output

This function allows you to select your favourite audio 
output system.

Selected item

Description

PCM

The optical output format is normally in 
PCM.

Dolby Digital

Dolby Digital audio will be output when 
there is a Dolby Digital audio signal. 
The output will be in PCM when there 
is no Dolby Digital audio signal.

H

 Audio only

When listening to music from a music programme, you 
can set the display off and enjoy audio only.

Selected item

Description

On

Audio is output without screen image.

Off

Both screen images and audio are output.

NOTE 

• When you make operations that change the picture on the TV 

such as by changing the input source, the Audio only function 
is set to “Off”.

H

 Game play time

This function displays the elapsed game time so you 
do not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal connected 
to the game console before starting the game.

Selected item

Description

On

The elapsed time is displayed every
30 minutes when you switch to GAME 
mode in external input mode.

Off

Hides the time.

H

 Colour system

You can change the colour system to one that is 
compatible with the image on the screen. (Auto, PAL, 
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)

NOTE 

• If “Auto” is selected, colour system for each channel is 

automatically set. If an image does not display clearly, select 
another colour system (e.g. PAL).

• “Colour system” is selectable only when inputting an 

S-VIDEO or composite signal.

H

 DivX Reg Code

Please see USB Media Player on page 24.

H

 Version up

This function is only for service personnel to use for 
software updates.

LC32L450X_EN.indb   15

LC32L450X_EN.indb   15

05/08/10   02:54:37 PM

05/08/10   02:54:37 PM

Summary of Contents for LC-32L450X





































Reviews: