background image

English

   - 12 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz. 

To switch on the TV from standby mode either:

Press the “ ” button, 

P+

 / 

P-

 or a numeric button on 

the remote control.
Press the side function switch until the TV comes on 

from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press 

the side function switch until the TV switches into 

standby mode.

To power down the TV completely, unplug the 

power cord from the mains socket.

Note

: When the TV is switched to standby mode, the standby 

LED can blink to indicate that features such as Standby 

Search, Over Air Download or Timer is active. The LED can 

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language 

selection screen is displayed. Select the desired 

language and press OK.
The First Time Installation (FTI) screen will be 

displayed next. Set your preferences using the 

navigation buttons and when finished, press OK to 

continue.
You can activate 

Store mode

 option to be available 

in “Other settings” menu and your TV’s features will 

be illustrated on the top of the screen. A confirmation 

screen will be displayed. Select 

YES

 to proceed.

If Home Mode is selected, Store mode will not be 

available after the First Time Installation. Press 

OK

 

button to continue.

Aerial Installation

If you select 

AERIAL

 option from the 

Search Type 

screen, the television will search for digital terrestrial 

TV broadcasts.

NOTE

: You can press 

MENU

 button to cancel.

After all the available stations are stored, the Channel 

List will be displayed on the screen. If you like how the 

channels are sorted according to the LCN (*), please 

select “Yes” and than press 

OK

.

Press 

MENU

 button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that 

organizes available broadcasts in accordance with a 

recognizable channel sequence (if available).

Cable Installation

If you select 

CABLE

 option and press 

OK

 button on 

the remote control. To continue, please select 

YES

 

and press 

OK

. To cancel operation, select NO and 

press 

OK

. You can select frequency ranges from 

this screen. 
Enter the frequency range manually by using the 

numeric button. 

Note

: Searching duration will change depending on the 

selected search step.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external power 

supply) external hard disk drives or USB memory stick to your 

TV by using the USB inputs of the TV.

IMPORTANT!

 Back up your files before making 

any connections to the TV. Manufacturer will not be 

responsible for any file damage or data loss. Certain 

types of USB devices (e.g. MP3 Players) or USB hard 

disk drives/memory sticks may not be compatible 

with this TV. The TV supports FAT32 and NTFS disk 

formatting but

 

recording will not be available with 

NTFS formatted disks.
While formatting a USB hard disk that has 1TB (Tera 

Byte) or more file capacity, you can experience 

problems with the formatting process. Do not 

repeatedly quickly plug and unplug the drive. This 

may cause physical damage to the USB player and 

USB device itself. Do not pull out USB module while 

playing a file.

Recording a Programme

IMPORTANT

: When using a new USB hard disk drive, 

it is recommended that you first format the disk using 

your TV’s “Format Disk” option.

Note :

 To record a programme, you should first 

connect a USB disk to your TV while the TV is 

switched off. You should then switch on the TV to 

enable the recording feature.
To use the recording function, you need to connect 

a USB disk or an external hard disk drive to the TV 

and the connected USB disk should have at least 1 

GB capacity and should have 2.0 speed compatibility. 

If the connected USB device does not support 2.0 

speed, an error message will be displayed.

Note

:  Recorded  programmes  are  saved  into  the 

connected USB disk. If desired, you can store/copy 

recordings onto a computer; however, these files will 

not be available to be played on a computer. You can 

play the recordings only via your TV.

Note

: Lip Sync delay may occur during the timeshifting. 

Radio record is supported. The TV can record 

programmes up to ten hours.
Recorded programmes are split into 4GB partitions. 

First Time Installation - USB Connections

Summary of Contents for LC-32LD145V



























Reviews: