background image

English

   - 21 -

End of life disposal

A. Information on Disposal for Users (private households) 
1. In the European Union 

Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! 

Used electrical and electronic equipment must be treated separately and in accordance with legislation 

that requires proper treatment, recovery and recycling of used electrical and electronic equipment. 
Following the implementation by member states, private households within the EU states may return 

their used electrical and electronic equipment to designated collection facilities free of charge*. 

in some countries* your local retailer msy also take back your old product free of charge if you 

purchase a similar new one. 

*) Please contact your local authority for further details.  

If your used electrical or electronic equipment has batteries or accumulators, please dispose of 

these separately beforehand according to local requirements.  

By disposing of this product correctly you will help ensure that the waste undergoes the necessary 

treatment, recovery and recycling and thus prevent potential negative effects on the environment 

and human health  which could otherwise arise due to inappropriate waste handling. 

2. In other Countries outside the EU 

If you wish to discard this product, please contact your local authorities and ask for the correct 

method of  disposal. 

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, 

even if you don’t purchase a new product. Further collection facilities are listed on the homepage 

of www.swico.ch or www.sens.ch. 

B. Information on Disposal for Business Users 
1. In the European Union 

If the product is used for business purposes and you want to discard it: 

Please contact your SHARP dealer who will inform you about the take-back of the product. You might 

be charged for the costs arising from take-back and recycling. Small products (and small amounts) 

might be taken back by your local collection facilities. 

For Spain: Please contact the established collection system or your local authority for take-back 

of your used products. 

2. In other Countries outside the EU 

If you wish to discard of this product, please contact your local authorities and ask for the correct 

method of disposal. 

The battery supplied with this product contains traces of Lead. 

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general 

household waste! There is a separate collection system for used batteries, to allow proper treatment 

and recycling in accordance with legislation. Please contact your local authority for details on the 

collection and recycling schemes. 

For Switzerland: The used battery is to be returned to the selling point. 

For other non-EU countries: Please contact your local authority for correct method of disposal of 

the used battery.

Attention: Your 

product is marked 

with this symbol. 
It means that used 

electrical and 

electronic products 

should not be 

mixed with general 

household waste. 
There is a separate 

collection system 

for these products.

Summary of Contents for LC-32LD145V



























Reviews: