background image

English

   - 5 -

Safety Precautions

Read the following recommended safety 

precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240V 

AC, 50Hz outlet. Ensure that you select the correct 

voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the 

power cord (mains lead) or pinch the cord. Handle the 

power cord by the plug. Do not unplug the appliance 

by pulling from the power cord and never touch the 

power cord with wet hands as this could cause a short 

circuit or electric shock. Never make a knot in the cord 

or tie it with other cords. The power cords should be 

placed in such a way that they are not likely to be 

stepped on. A damaged power cord can cause fire or 

give you an electric shock. When it is damaged and 

needs to be replaced, it should be done by qualified 

personnel.

Moisture and Water

Do not use this device in a humid and 

damp place (avoid the bathroom, the 

sink in the kitchen, and near the washing 

machine). Do not expose this device to 

rain or water, as this may be dangerous 

and do not place objects filled with 

liquids,  such  as  flower  vases,  on  top. 

Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug 

the TV and have it checked by qualified personnel 

before operating it any further. 

Cleaning

Before cleaning, unplug the TV set 

from the wall outlet. Do not use liquid or 

aerosol cleaners. Use soft and dry cloth. 

Ventilation

The slots and openings on the TV set 

are intended for ventilation and to ensure reliable 

operation. To prevent overheating, these openings 

must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to 

open flames and sources of intense heat 

such as an electric heater. Ensure that 

no open flame sources, such as lighted 

candles, are placed on top of the TV. Batteries should 

not be exposed to excessive heat such as sunshine, 

fire or the like.

Lightning

In case of storm and lightning or when 

going on holiday, disconnect the power 

cord from the wall outlet. 

Replacement Parts

When replacement parts are required, make sure that 

the service technician has used replacement parts, 

which are specified by the manufacturer or have the 

same specifications as the original one. Unauthorized 

substitutions  may  result  in  fire,  electrical  shock  or 

other hazards.  

Servicing

Please  refer  all  servicing  to  qualified 

personnel. Do not remove the cover 

yourself as this may result in an electric 

shock.

Waste Disposal

• 

Packaging and packaging aids are recyclable and 

should principally be recycled. Packaging materials, 

such as a foil bag should be kept away from children 

• 

Batteries, including those which are heavy metal 

free, should not be disposed of with household 

waste. Please dispose of used batteries in an 

environmentally friendly manner. Find out about the 

legal regulations which apply in your area. 

• 

Do not try to recharge batteries, there is a danger 

of explosion. Replace batteries only with the same 

or equivalent type.

This symbol on the product or on its packaging means 

that your electrical and electronic device 

should be disposed at the end of its 

service life separately from your 

household wastes. There are separate 

collection systems for recycling in the EU. 

For more information, please contact the 

local authority or the dealer where you 

purchased the product.

Disconnecting the Device

The mains plug is used to disconnect the TV set 

from the mains and therefore it must remain readily 

operable.

Headphone Volume

Excessive sound pressure from earphones 

and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely 

attached to the wall in accordance with the installation 

instructions when mounted to the wall (if the option 

is available).

Summary of Contents for LC-32LD145V



























Reviews: