Sharp LC-32LD164E Operation Manual Download

Page: 12 / 17

Connecting a USB device or external devices

10 -

- 11

• Cables used to extend the USB device must be certified

as USB 2�0�

• Video playback via a USB device may not be possible or

the playback quality affected if the device data transfer

speed rating is too low�

• File number over 1000 may not be displayed�
• No quickly operation between play / pause /

fast forward / rewind�

• The video might get judder or unsmooth when USB

read/write speed is under requirement(some Full HD

format)�

• Files in USB 1�1 devices may not be played properly�
• Some video file formats may not be played depending

on the file�

Inserting the Smartcard into CA module

In order to receive coded digital stations, a Conditional
Access module (CA module) and a Smartcard must be
inserted into the CI (Common Interface) slot of the TV�
The CA module and the Smartcard are not supplied
accessories� They are usually available from your
dealer�

Inserting the Smartcard into the CA module

1�

Carefully insert the CA module into the CI slot
with the contact-side forward�

2�

The logo on the CA module must be facing
outward from the rear of the TV�

NOTE

• It takes about 30 seconds to certify the license key

when you insert a Smartcard into the CI+ compatible

CA module for the first time� This process may fail when

there is no antenna input or you have never run “Auto

installation”�

• The CI+ compatible CA module sometimes upgrades

its firmware� You may not receive any TV images before

upgrading� You can only use the power button during

upgrading�

• The CI+ compatible CA module does not allow you to

output any copy protected programmes using monitor

out�

• If the TV displays an update confirmation message

for the Smartcard while receiving CI+ compatible

broadcasts, follow the screen prompts�

• Make sure that the CA module is properly inserted�

Checking CA module information

After inserting and activating the CA module, make
sure the input source is

�

NOTE

• This menu is only available for digital stations�
• The content of this menu depends on the provider of the

CA module�

Module:

General information on CA module displays�

Menu:

Adjustment parameters of each Smartcard

displays�

Enquiry:

You can input numerical values such as

passwords here�

HDMI connection

One touch play

• When the TV is in standby mode, it will automatically

turn on and play back the image from the HDMI
source�

Audio return channel (ARC)

The TV can send audio data for video content shown
on the TV to a connected audio device with just one
ARC-compatible HDMI cable� Using this function
eliminates the need to use a separate digital or
analogue audio cable�

Connection for using “Audio return channel”

• You need to use ARC-compatible cables/devices

and connect to the

HDMI 1

terminal to activate this

function�

Supported display resolutions

Computer formats (PC)
Resolution

Refresh rate

640 x 480

60Hz

800 x 600